A hydraulic power pack is the self-contained unit - pump, motor, reservoir, and valves - that generates and controls hydraulic power for a machine. NHE designs and builds custom power packs (standard, compact, high-pressure, mobile, and servo-hydraulic) sized to a customer's specific pressure, flow, and duty-cycle requirements, rather than supplying only standard catalog units.
Tie rod cylinders use external rods to hold the end caps in place, making them easier to service and rebuild - common in industrial and mobile equipment. Welded cylinders have permanently welded end caps, giving a more compact, rugged design suited to heavy-duty and mill-duty applications where serviceability matters less than strength. NHE manufactures both types in-house.
Yes. Modernization is a core part of NHE's engineering scope - upgrading aging power packs, cylinders, or manifolds on existing machines without a full system replacement. This preserves capital investment while improving performance, energy efficiency, and safety compliance.
Send an engineering drawing or describe the application (load, stroke length, operating pressure, mounting constraints) to NHE's design team, who evaluate the application before proposing a solution rather than matching to a fixed catalog spec.
Every unit goes through Factory Acceptance Testing (FAT) at NHE's Pune facilities, with pressure testing performed to the specific operating conditions of the application. Site Acceptance Testing (SAT) follows after installation to confirm performance under real operating conditions.
For mineral oil applications, NHE recommends ISO VG 32-VG 68 grade oil with NAS-9 class cleanliness. Contamination control is achieved through return-line and pressure-line filters with adequate micron ratings, regular oil cleanliness monitoring at customer sites, and system flushing and filtration verification before commissioning.
The most common root causes NHE diagnoses in the field are contamination (particulate damaging seals), excessive oil heat (thermal degradation of elastomers), damaged or corroded piston rods and cylinder tubes, and excessive radial loads on piston rods causing uneven seal wear.
The factor of safety considered depends on the application, but hydraulic cylinders are generally designed with a 1.4 factor of safety - a conservative engineering margin that ensures long service life under rated conditions while accommodating pressure spikes and load variations.
Yes. NHE builds hydraulic fork lifters, mobile bowl-handling trolleys, and lift tables in Grade 304 stainless steel, engineered to meet cleanroom hygiene and quality standards for pharmaceutical manufacturing under FDA 21 CFR Part 211 and EU GMP Annex 1 compliance.
NHE exports hydraulic systems and components to the UK, Russia, Sri Lanka, Belgium, Luxembourg, UAE, Saudi Arabia, Kazakhstan, Egypt, and the USA.
Yes. NHE is an authorized technical partner for Yuken India Ltd., which manufactures hydraulic components in collaboration with Yuken Kogyo Co. Ltd. of Japan.
NHE recommends checking contamination levels at regular intervals, maintaining oil cleanliness to NAS-9 as a baseline, using dual filtration (return + pressure line) with filter condition indicators, and scheduling filter replacement based on pressure differential rather than calendar time.
+91 73876 41968
info@newhydro.co.in